manualshive.com logo in svg

Lenovo ThinkServer TD340, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD340 is a robust and reliable server designed to meet the needs of small to medium-sized businesses. To aid in seamless operation and maintenance, we offer the User Manual and Hardware Maintenance Manual, available for free download from our website, ensuring hassle-free setup and optimal performance.

Share
Download
background image

6. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor

socket. Place the old microprocessor on a static-protective surface.

Notes:

• Do not touch the gold contacts on the bottom of the microprocessor.

• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 104. Removing the microprocessor

7. Touch the static-protective package that contains the new microprocessor to any unpainted surface on

the outside of the server. Then, remove the new microprocessor from the package.

8. Remove the protective cover that protects the gold contacts on the bottom of the new microprocessor.

Do not touch the pins on the microprocessor socket and the gold contacts on the bottom of the new
microprocessor.

Figure 105. Do not touch the pins

Chapter 6

.

Installing, removing, or replacing hardware

163

Summary of Contents for ThinkServer TD340

















































































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD340

ONELAN OMNI-HD1 Installation & Configuration Manual preview
OMNI-HD1
Brand: ONELAN Pages: 24
TYAN FT77B-B7059 Service Engineer'S Manual preview
FT77B-B7059
Brand: TYAN Pages: 170
Patton electronics 29XX Series Administrator'S Reference Manual preview
29XX Series
Brand: Patton electronics Pages: 326
NEC EXP339 User Manual preview
EXP339
Brand: NEC Pages: 128
X-media XM-PS110P Quick Installation Manual preview
XM-PS110P
Brand: X-media Pages: 10
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Brand: TRENDnet Pages: 47
Compatible Systems INTRAPORT 2 Administrator'S Manual preview
INTRAPORT 2
Brand: Compatible Systems Pages: 75
EVGA PD02 PCoIP Zero Client Specifications preview
PD02 PCoIP Zero Client
Brand: EVGA Pages: 2
EVGA PD02 PCoIP Zero Client TAA Compliant Specification preview
PD02 PCoIP Zero Client TAA Compliant
Brand: EVGA Pages: 2
Meinberg IMS-M4000 Manual preview
IMS-M4000
Brand: Meinberg Pages: 112
Inspur NF3120M5 User Manual preview
NF3120M5
Brand: Inspur Pages: 196
Tektronix 5 Series Service Manual preview
5 Series
Brand: Tektronix Pages: 50
Paxar 9840 Operating Instructions Manual preview
9840
Brand: Paxar Pages: 20
Oracle X4 series Administration Manual preview
X4 series
Brand: Oracle Pages: 240
LaCie 301258U - 2big Network NAS Server User Manual preview
301258U - 2big Network NAS Server
Brand: LaCie Pages: 36
Yoko Technology RYK-VS410 User Manual preview
RYK-VS410
Brand: Yoko Technology Pages: 75
Xerox FreeFlow Carrier Procedures Manual preview
FreeFlow
Brand: Xerox Pages: 28
NComputing L130 Selection Manual preview
L130
Brand: NComputing Pages: 2

Brands by name

Popular brands

Load more brands