manualshive.com logo in svg

Lenovo ThinkServer TD340, User Manual And Hardware Maintenance Manual

The Lenovo ThinkServer TD340 is a robust and reliable server designed to meet the needs of small to medium-sized businesses. To aid in seamless operation and maintenance, we offer the User Manual and Hardware Maintenance Manual, available for free download from our website, ensuring hassle-free setup and optimal performance.

Share
Download
background image

Notes:

• The number on the label for each of the four SATA signal cables indicates the sequence to follow when

you are connecting the cables to the corresponding SATA connectors (0-3) on the system board.

SATA signal cable label

System board SATA connector

P0

SATA connector 0

P1

SATA connector 1

P2

SATA connector 2

P3

SATA connector 3

• For information about configuring RAID using the configuration utility for the ThinkServer RAID 100 or

RAID 300, see “Configuring the ThinkServer RAID 100 or RAID 300” on page 74.

3. If you have more than four hard disk drives installed, use the other mini-SAS to mini-SAS signal cable.

Connect one connector of the mini-SAS signal cable to the SAS connector 4-7 on the system board.
Then, connect the other connector of the mini-SAS signal cable to the mini-SAS signal cable connector
1 on the 2.5-inch hot-swap hard-disk-drive backplane or to the mini-SAS signal cable connector 0 on
the 3.5-inch hot-swap hard-disk-drive backplane. The 3.5-inch hot-swap hard-disk-drive backplane
is installed on the upper hard-disk-drive cage.

Note:

If you connect the mini-SAS to mini-SAS signal cables from the system board to the backplanes,

you can configure RAID using the configuration utility for the ThinkServer RAID 100 or RAID 300. See
“Configuring the ThinkServer RAID 100 or RAID 300” on page 74.

Connecting the mini-SAS signal cables from the RAID card to the hot-swap
hard-disk-drive backplanes

If your server has a supported RAID card installed, you can connect the mini-SAS signal cables from the
RAID card to the backplanes to support up to eight hard disk drives. In this case, you can configure RAID for
the hard disk drives using the advanced hardware RAID functions.

Note:

The option package for the RAID card is designed for different types of servers and might contain

additional cables that are not required for installation.

To connect the mini-SAS signal cables from the RAID card to the backplanes, do the following:

• If you are using a ThinkServer RAID 500 Adapter, do the following:

1. Use one mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector

1

on one end of the

cable to the port 0 on the RAID card. Then, connect the mini-SAS connector

2

on the other end of the

cable to the mini-SAS signal cable connector 0 on the 2.5-inch hot-swap hard-disk-drive backplane
or on the 3.5-inch hot-swap hard-disk-drive backplane. The 3.5-inch hot-swap hard-disk-drive
backplane is installed on the lower hard-disk-drive cage.

2. If your server has more than four hard disk drives installed, use the other mini-SAS to mini-SAS signal

cable. Connect the mini-SAS connector

3

on one end of the cable to the port 1 on the RAID card.

Then, connect the mini-SAS connector

4

on the other end of the cable to the mini-SAS signal

cable connector 1 on the 2.5-inch hot-swap hard-disk-drive backplane or to the mini-SAS signal
cable connector 0 on the 3.5-inch hot-swap hard-disk-drive backplane. The 3.5-inch hot-swap
hard-disk-drive backplane is installed on the upper hard-disk-drive cage.

• If you are using a ThinkServer RAID 700 Adapter, do the following:

1. Use one mini-SAS to mini-SAS signal cable. Connect the mini-SAS connector

3

on one end of the

cable to the ports 3-0 on the RAID card. Then, connect the mini-SAS connector

4

on the other end

of the cable to the mini-SAS signal cable connector 0 on the 2.5-inch hot-swap hard-disk-drive
backplane or on the 3.5-inch hot-swap hard-disk-drive backplane. The 3.5-inch hot-swap
hard-disk-drive backplane is installed on the lower hard-disk-drive cage.

44

ThinkServer TD340 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TD340

















































































































































































































































Reviews:

No comments

Related manuals for ThinkServer TD340

Mako 6500 Setup & Configuration Instructions Manual preview
6500
Brand: Mako Pages: 56
NComputing L130 User Manual preview
L130
Brand: NComputing Pages: 95
Yamaha MCX-2000 - MusicCAST Digital Audio Server Owner'S Manual Addendum preview
MCX-2000 - MusicCAST Digital Audio Server
Brand: Yamaha Pages: 25
IBM x3100 M5 Type 5457 Installation And Service Manual preview
x3100 M5 Type 5457
Brand: IBM Pages: 688
SEH SEH InterCon PS54a-G Hardware Installation Manual preview
SEH InterCon PS54a-G
Brand: SEH Pages: 24
TYAN B2932 Service Manual preview
B2932
Brand: TYAN Pages: 81
Atop ABLELink GW21W User Manual preview
ABLELink GW21W
Brand: Atop Pages: 52
Lenovo 7Y45 Setup Manual preview
7Y45
Brand: Lenovo Pages: 116
Lenovo 70F0 User Manual And Hardware Maintenance Manual preview
70F0
Brand: Lenovo Pages: 96
Lenovo 8753 Product Manual preview
8753
Brand: Lenovo Pages: 46
Lenovo 7Y54 Maintenance Manual preview
7Y54
Brand: Lenovo Pages: 138
Lenovo 8871 Product Manual preview
8871
Brand: Lenovo Pages: 56
Lenovo 8869 Product Manual preview
8869
Brand: Lenovo Pages: 64
Lenovo DU User Manual preview
DU
Brand: Lenovo Pages: 226
Lenovo BladeCenter HS22 Installation And User Manual preview
BladeCenter HS22
Brand: Lenovo Pages: 96
Lenovo BladeCenter HS23 Installation And User Manual preview
BladeCenter HS23
Brand: Lenovo Pages: 104
Lenovo 643815U Installation Manual preview
643815U
Brand: Lenovo Pages: 90
Lenovo 6435 User Manual preview
6435
Brand: Lenovo Pages: 76

Brands by name

Popular brands

Load more brands