Lenovo ThinkServer TD340, User Manual And Hardware Maintenance Manual

Page: 205 / 240

6. Remove the old system board battery.
Figure 130. Removing the system board battery
7. Install a new system board battery.
Figure 131. Installing the system board battery
8. Reinstall the PCI Express card (such as the Ethernet card) that has been removed. See “Installing the
Ethernet card” on page 100.
9. Dispose of the old system board battery as required by local ordinances or regulations.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 200. After you replace
the system board battery, you must reset passwords, reset system date and time, and reconfigure the
server. See Chapter 5 “Configuring the server” on page 61.
Replacing the system board
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 83.
This topic provides instructions on how to replace the system board.
Note: This procedure must be performed only by trained service personnel of Lenovo.
CAUTION:
Hazardous moving parts. Keep fingers and other body parts away.
Chapter 6
.
Installing, removing, or replacing hardware
193