Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual Download Page 33

Page: 33 / 240

LED

Status

Description

Action

Solid off

The system fans are operating
correctly.

System fan error LED

Solid on (amber)

One or more system fans are
running at low speed or have
been removed.

Check the BMC for errors and
run the diagnostic programs. See
“Using a diagnostic program” on
page 203.

Note:

To identify the failing

system fans, check the status
LEDs on the system board. See
“System board LEDs” on page
56.

Solid off

The server is running at a normal
temperature.

Ambient temperature

limit LED

Solid on (amber)

The ambient temperature is below
7°C (44.6°F) or over 40°C (104°F).

Check the BMC for errors and
run the diagnostic programs. See
“Using a diagnostic program” on
page 203.

Solid off

The power supply is working
correctly.

Power supply error

LED

Solid on (amber)

The power supply is likely to fail
or has failed.

Check the BMC for errors and
run the diagnostic programs. See
“Using a diagnostic program” on
page 203.

Note:

To identify the failing power

supply, check the status LED
near the power cord connector
on the redundant power supply.

Rear view of the server

This topic provides information to help you locate the connectors and components on the rear of your server.

Chapter 3

Product overview

Summary of Contents for ThinkServer TD340

















































































































































































































































Search results

Summary of Contents for ThinkServer TD340

Reviews:

Related manuals for ThinkServer TD340

Brands by name

Popular brands

Lenovo ThinkServer TD340, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TD340

Reviews:

Related manuals for ThinkServer TD340

Brands by name

Popular brands