This page shows you the system information, include UEFI firmware version, build time and the system
Date / Time were being set. This page also includes 2 sub-mainus below:
–
Processors
Select this choice to view or change the processor settings.
–
Memory
Select this choice to view or change the memory settings.
•
Advanced
–
AST2400 Super IO Configuration
Select this to enter Super IO next configuration page.
–
Upper IO chip
Enter this page you can view the Super IO Chipest information.
–
Serial Port 1 Configuration
Enter this page you can Enable/Disable Serial Port of this Super IO.
–
Serial Port Console Redirection
Select this to enter the Super IO Console Redirection sub configuration page or view Windows
Emergency Management Service ( EMS ) Console Redirection setting.
–
Console Redirection Settings
Select this to view the overall settings.
–
Legacy Console Redirection Setting
–
Console Redirection Settings
–
PCI Subsystem Settings
Select this to view or change the PCI Devices common settings.
–
Network Stack Configuration
Select this to view or change Network Stace IPV4 and IPV6 PXE Support settings.
–
CSM Configuration
Select this to view or change CSM Support and Netwrok, Storage, Video, Other PCI devices legacy
support.
–
Infor Report Configuration
Select this to view or change POST Report and Summary Screen settings.
–
iSCSI Configuration
Select this to Add, Delete or Change an iSCSI Initiator Name or Attempt.
•
IntelRCSetup
–
Processor Configuration
Select this choice to view Processor common settings or change the dedicate processor settings.
–
Per-Socket Configuration
Select to view or change CPU 0 or CPU 1 Configuration.
–
Advanced Power Management Configuration
Select this to view or change Intel Chipset Power Management Configuration.
–
CPU Pstate Control
–
CPU HWPM State Control
–
CPU C State Control
Configuration information and instructions
35
