Lennox iComfort S30 Installation And Setup Manual Download

Page: 95 / 100

Technical Support and Mobile App for Installers/Technicians

Only

Technical Support for Installers/Technicians Only

Lennox Residential technical support can be reached at 1-800-453-6669.

Hours for support are Monday through Friday 8am - 8pm EST.

Get targeted help: Tell us the issue so we get you to right rep, offer relevant

tips, reminders & follow-up!
•  Complaints
•  Technical support
•  Repairs
•  Returns

iComfort Mobile Setup Application for Installers/Technicians Only

The Lennox iComfort Mobile Setup App lets HVAC technician’s setup, configure

and test a Lennox iComfort S30 system directly on their mobile device.
Once installed, the dealer can pair their mobile device to the Lennox iComfort

smart hub to easily make changes from anywhere in the home, saving them

the hassle of walking back and forth from the thermostat to the indoor and

outdoor HVAC unit.
With just a touch, technicians can:
•

Setup and Configure the system

• Adjust parameters
• Run system tests

This app is designed for Lennox HVAC technicians servicing iComfort E30 and

S30 systems.

LennoxPros Mobile Application for Installers/Technicians Only

LennoxPROs.com and the LennoxPROs mobile application have all the

information HVAC Professionals and businesses need in one place. From

shopping for parts and supplies to using our FREE e-tools, we have you

covered.

LennoxPros Dealer Dashboard

The dealer dashboard displays Dealer’s iComfort

thermostat installations in

one convenient location. It is accessible through the Service Dashboard at

www.LennoxPros.com.

The thermostat can be accessible via the Dealer Dashboard only after the

dealership’s main phone number or company name is added during thermostat

commissioning.

Service Dashboard Search Screen

•

Customers can be searched using the following criteria: first name, last

name, first and last name, zip code, city, email address, equipment type,

error code, serial number or model number.

•

Customer searches can be filtered by various options: thermostat type, alert

type, access level or maintenance reminders.

Customer Results Screen

Displays a list of customers with installed iComfort

thermostats, and their

locations:
•  Name
•  Address
•  Phone
•  Email
•  Thermostat Type and Monitor Status
Map displays the following:
•

Shows all customer’s locations and any current alerts

• Color-coded pins on the map denote the following:

Red - Critical Alert

Yellow - Moderate Alert

Green - No Alerts, normal operation

Black - No system information sharing

NOTE:

Click on a customer’s pin to view information about their system.

NOTE:

Selecting a customer from the list or map pin displays the detailed

System Overview Screen including owner information, system

components, system history, status and any alerts.

Customer Details Screen

Home Systems

• Shows thermostat connection status
• Multiple home systems are displayed for each customer if there are more

than one system.

Summary of Contents for iComfort S30




































































































Search results

Summary of Contents for iComfort S30

Reviews:

Related manuals for iComfort S30

Brands by name

Popular brands

Lennox iComfort S30, Installation And Setup Manual

Search results

Summary of Contents for iComfort S30

Reviews:

Related manuals for iComfort S30

Brands by name

Popular brands