iNEX User Manual
Page
70 Rev
2
7.4.4
Selecting Measurement & Position Units
The iNEX can be customised to display Metric or Imperial measurement
units and also Easting & Northing or Latitude & Longitude position units
depending on the operator's requirements.
1.
From the Main menu press
SETUP
.
2.
Press
DISPLAY SETUP
.
3.
Press the Measurement Units button
repeatedly until the desired setting is
displayed
.
4.
Press the Position Units button
repeatedly until the desired setting is
displayed.
7.4.5
Select Status Bar Details
The Status Bar displays information about the current treatment and
connected devices. The information available on the Status Bar can be
configured by the operator so that only the required information is
displayed.
1.
From the Main menu press
SETUP
.
2.
Press
DISPLAY SETUP
.
3.
Press
STATUS BAR DETAILS
.
4.
Select what information is to be
displayed by pressing the relevant
ON
/
OFF
button
.
5.
Press
EXIT SETUP
.
6.
To view the different information
press the Status Bar to make it
advance to the next one.
