iNEX User Manual
Page
5 Rev
2
2
iNEX Installation
2.1
Before Installation
Installation does not require specialist knowledge. However, Leica
Geosystems recommends that installation of the iNEX equipment be
performed by a qualified technician, because installation requires
making electrical connections.
Leica Geosystems is not liable for any damage, faults or risks related to
installation or to the iNEX or your vehicle due to installation.
Leica Geosystems declines all responsibility for any incorrect
information in the iNEX Installation Manual.
The following instructions are to be used as a general guide during the
installation of the iNEX. For more specific instructions, please contact
your point of purchase.
Install the system in a clean and dry workshop environment. Failure to
do so may cause the system to short or promote product malfunction.
Route and secure all cables and wiring to ensure that they do not chafe
or rub, thus causing premature failure.
The average installation time will vary, but it should be approximately
three to four hours per vehicle. The installation time may be more or
less, depending on vehicle type.
