iNEX User Manual
Page
109 Rev
2
15
Appendix
15.1
Equipment Measurement Examples
There are many different types of vehicles and implements. A few are
listed here followed with a description of how they are to be measured.
•
Standard Tractor
•
Tracked Tractor
•
Articulated Tractor
•
Gooseneck Hitch
•
Self Propelled Sprayer – Rear Mount Boom
•
Self Propelled Sprayer – Front Mount Boom
•
Self Propelled Sprayer – Four Wheel Steer
•
Self Propelled Combine Harvester
•
Tow Behind Boom
•
Tow Behind Boom - Steered
•
Tow Between Tank or Air Cart
•
Trailer with Front Pivoting Axle
The main principal when entering equipment into the iNEX is that
measurements are intended to define the antenna point in relation to the
equipments pivoting point, such as a fixed axle, and the hitch or flow
point.
When measuring the GPS Antenna in relation to the equipment centreline
if the antenna is to the Left of centre it should be entered as a negative
value, and equally if the antenna is on the Right of centre it should be
entered as a positive value.
When connected to a mojoRTK console the antenna reference point is
inline with the two antennas and no GPS antenna offset needs to be
entered as this will be automatically set by the mojoRTK implement offset
value.
