Leica HistoCore Arcadia H, Instructions For Use Manual

Page: 31 / 50

31 HistoCore Arcadia H
Operation
5
Setting the working days
The automatic switch-on feature is linked with the individual weekdays. It is therefore necessary to
define the days for which the automatic switch-on feature shall operate.
Note
Only on those days of week that have been defined as working days, the instrument will be at the
required temperature and ready to operate.
Fig. 19
1. Touch the
Setup
( → Fig. 17- 14 ) button.
2. Touch the
Enter
( → Fig. 17- 18 ) button as many times as required until the icon of Mon
(Monday) flashes.
3. Touch the Left ( → Fig. 17- 16 ) / Right ( → Fig. 17- 21 ) buttons to switch between days of week,
and set the working days with the Up (
→
Fig. 17- 22 ) / Down (
→
Fig. 17- 17 ) buttons.
The selected working day is outlined with a rectangle.
The current day is identified with a reversed triangle.
4. Touch the
Enter
( → Fig. 17- 18 ) button to save the setting.
Setting the date and time
The date and time shown on the control panel must be set to the current local time to ensure the correct
operation of the time program control.
1. Touch the
Setup
( → Fig. 17- 14 ) button.
2. Touch the Enter ( → Fig. 17- 18 ) button as many times as required until the date format flashes.
3. Touch the Up ( → Fig. 17- 22 ) / Down ( → Fig. 17- 17 ) buttons to select the date format.
Date formats:
•
YYYY.MM.DD . Under this date format, the time format is 24-hour.
•
MM.DD.YYYY
. Under this date format, the time format is 12-hour.
•
DD.MM.YYYY
. Under this date format, the time format is 24-hour.
4. Touch the
Right
( → Fig. 17- 21 ) button.
5. Set the date and time with the Up ( → Fig. 17- 22 ) / Down ( → Fig. 17- 17 ) buttons. Touch the
Left ( → Fig. 17- 16 ) / Right ( → Fig. 17- 21 ) button to switch between the values of Year, Month,
Day, Hour, Minute, am and pm (only in 12-hour format).
Press the
Up / Down button for more than 2 seconds, and the setting value is changed
continuously.
6. Touch the
Enter
( → Fig. 17- 18 ) button to save the setting.