Leica Digilux 2, Instructions Manual

Page: 186 / 192

184 / Warning messages
Warning messages
NO MEMORY CARD
Insert a memory card
THIS MEMORY CARD IS PROTECTED
Reset the write protection for the memory card.
NO VALID IMAGE TO PLAY
No pictures are saved on the inserted card. In order
for review to take place, pictures first of all need to be
taken or another card with saved pictures inserted.
MEMORY CARD FULL/NOT ENOUGH MEMORY IN
THE CARD
Insert another memory card or delete pictures you no
longer need.
MEMORY CARD ERROR (depending on the card this
message may be issued with a delay)
It was not possible to access the memory card.
Remove it and re-insert it. The memory card may be
damaged.
MEMORY CARD ERROR/FORMAT THIS CARD?
The data format on the memory card cannot be read
by this camera. Format the memory card with this
camera.
READ ERROR
The data on the memory card cannot be read. Open
the desired picture again.
WRITE ERROR
The picture data could not be written to the memory
card. Remove it and re-insert it or turn the camera off
and back on. However, the memory card may be
damaged.
MEMORY CARD DOOR OPEN
Close the cover.
SYSTEM ERROR
The lens functions malfunction when setting the rings.
Turn the camera off and back on again. If the error
persists, you should consult your dealer or Leica
Camera AG.
PLEASE SET THE CLOCK
This message appears the first time you use the
camera or when you use it again after a long period of
time, particularly if the battery was removed.
PLEASE CLOSE THE FLASH
Make sure that the reflector is fully locked, i. e. at the
front and back.
THIS PICTURE IS PROTECTED
After removing the protection, the picture can be
deleted or overwritten.
NO ADDITIONAL DELETE SELECTIONS CAN BE
MADE
The number of markings possible for deletion (MULTI
DELETE) has been exceeded.
THIS PICTURE CAN’T BE DELETED/
SOME PICTURES CAN’T BE DELETED
After removing the protection, the picture(s) can be
deleted.
CAN’T BE SET ON THIS PICTURE/
CAN’T BE SET ON SOME PICTURES
The pictures on the memory card are not compatible
with the DCF standard, therefore it is not possible to
make print order settings or sound recordings.
THIS PICTURE CANNOT BE RESIZED
PLEASE WAIT
This message appears with shutter speeds that are
too slow or if the camera is too hot.