24
2014+ XL Raider
NOTE: Do not over tighten taillight mounting
hardware. Damage to housing may occur.
1.
See Fig 1 & 2.
Mount taillight assemblies to
body with gaskets. Attach ground wire to stud
with flange nut after taillight mounting hard-
ware is installed.
•
(2) Taillight Assembly-S002204
•
(2) Gaskets– BG0200
•
(4) 1/4” Flat Washer– CW2006
•
(4) Lock washer– Provided with light
•
(4) Nut– Provided with light
•
(2) 1/4” Flange Nut– CN3007
2.
See Fig’s 3 & 4. If required-
Install female
terminals and male connectors to taillight wir-
ing Use appropriate tool for crimping termi-
nals to wires. (Mac Tools– TCT1028).
3.
See Fig’s 3 & 4
. Inspect crimps before in-
stalling into connector. Distortion should be
minimal.
BODY PREPARATION
Fig. 1
Fig. 4
Fig. 3
Wire core crimp
Insulation crimp
Female Terminal
1
2
3
Attach ground
wire to stud
Fig. 2
