13
2014+ XL Raider
NOTE: Once proper belt tracking is achieved the
shocks will need to be removed.
1. Temporarily install shocks to trike as shown.
2.
See Fig. 1
. Install spacer between shock and
frame on upper RH side. Use 1/2” x 2-3/4” bolt
and 14mm flat washer.
•
(1) RH Shock Spacer– S001941
•
(1) 1/2” x 2-3/4” Hex Bolt– CB1427
•
(1) 14mm Flat Washer– CW2155
3.
See Fig. 2.
RH
Shock will mount to threaded
hole on RH axle tube with shoulder bolt and flat
washer.
•
(1) 1/2” X 1-1/2” Shoulder Bolt– CB1426
•
(1) 14mm Flat Washer– CW2155
4.
See Fig. 3
. Install LH shock as shown using
original H-D hardware.
DIFFERENTIAL INSTALLATION
Fig. 2
Fig. 8
Fig. 1
Spacer
Thread bolt
into axle tube
RH Shock
RH Shock
LH Shock
CB1426
1/2” Shoulder
3/8” Threads
