11
2014+ XL Raider
1. Remove original upper and lower stabilizer links
from front of motorcycle. Remove lower bracket
at frame. Remove upper bracket at cylinder
head.
2.
See Fig. 1
. Install two bushings into each side of
new motor mounts. Steel inserts will slide into
bushings.
•
(8) Rubber Bushings- LB6402
•
(2) Motor Mounts- LL6400
•
(4) Steel Inserts– LS1150
3.
See Fig. 2
. Reinstall original Torx head bolts and
large 3/8” fender washer under upper and lower
RH bolts. Use Loctite 242.
Torque to 33 ft. lbs.
•
(2) 3/8” Fender Washers– CW2048
4. On lower mount use Loctite 242 on Torx head
bolts to reconnect bracket to frame.
Torque to
33 ft. lbs.
5.
See Fig. 3
. On upper mount use Loctite 242 on
Torx head bolts to frame.
Torque to 33 ft. lbs
.
Reinstall the engine bracket to cylinder head.
Torque to 60 ft. lbs.
MOTOR MOUNT INSTALLATION
Fig. 1
Fig. 2
Fig. 3
LB6402
Install large
washer to
lower RH bolt
Install large
washer to
upper RH bolt
Upper
Lower
Upper
Lower
