22
2014+ XL Raider
1.
See Fig. 1
. Attach rubber bumper to body sup-
port bracket using 1/2”bolt. Place a 1/2” washer
on both sides of rubber bumper and secure with
thin 1/2” lock nut. Place a 1/2” jam nut on bolt
and thread bolt into bracket until distance be-
tween top of bracket and bottom of bumper is
1-1/4”. Secure jam nut to bracket.
•
(1) Rubber Bumper– LS6407
•
(1) Top Body Support Bracket– LS6406
•
(1) 1/2” x 2 1/2” Bolt– CB1416
•
(2) 1/2” Washers– CW2025
•
(1) 1/2” Thin Lock Nut– CN3250-0
•
(1) 1/2” Nut– CN3025
2.
See Fig. 2.
Install top body support (LS6406) to
H-D frame using the following hardware. Leave
bolts loose.
•
(2) 5/16” x 1-3/4” Bolts- CB1175
•
(2) 5/16” Flat Washers– CW2010
•
(2) 5/16” Lock Washers– CW2045
3.
See Fig. 3
. Install rear LH body mount bracket
to
LH
H-D frame rail using the following hard-
ware. This bracket should also be left loose until
body is mounted. RH body/exhaust bracket
(LB6422) should already be in place from ex-
haust setup.
•
(1) LH Body Mount Bracket– LB6410
•
(1) 5/16” x 1-1/2” Bolts– CB1170
•
(2) 5/16” Flat Washers– CW2010
•
(1) 5/16” Lock Nuts– CN3045
BODY MOUNT INSTALLATION
1-1/4”
Lock nut
Jam nut
Fig. 1
Fig. 2
Fig. 3
LH frame rail
LH body mount
