User Manual LW120
Mixed Sequence A
E
dvance
ach step of a sequence can be programmed to advance
b)
ped Sequence Advance)
dv
urce
rnal; GPIB
Segment loops
From 1 to 1 Meg
1
µ
s for more than one loop.
l BNC
Stand-by
Output Off or Normal
50
Ω
,
±
1%
Amplitude
Range
Resolution
Accuracy (1 KHz)
Offset is attenuated with amplitude
pendent
Resolution
2.2
mV
Accurac
±1%
25
MHz
Elliptic
lity. All functions and modes, this
output generates sync pulse, which is synchronous with the
FM and sweep modes only, this output
esignated sample clock frequencies.
Front panel BNC
orary short to case ground
ali
able with 4-point resolution
oints
4
points
either a) automatically (Automatic Sequence Advance), or
with a trigger (Step
A ance So
External, rear panel BNC; Inte
Sequencer steps
From 1 to 4096
Segment Duration
Minimum
OUTPUTS
Channels 1 and 2 Output
Connector
Front pane
Impedance
Protection
Protected against temporary short to case ground
10 mV to 10 Vp-p, into 50
Ω
; Double into open circuit
3.5
digits
±
(1% + 25 mV), 1.000 V to 10 Vp-p
±
(1% + 5 mV), 100 mV to 999.9 mVp-p
±
(1% + 2 mV), 10 mV to 99.99 mVp-p
Offset
Offset
Range
0 to ±4.5 V, amplitude de
y
Filters
50 MHz Elliptic
Square Wave, Pulse
Rise/Fall time
<10 ns, 10% to 90% of amplitude
Aberration
<5%
SYNC/Marker Output
Description
Provides dual functiona
output waveform. In
generates a marker at d
Connector
Impedance
50
Ω
,
±
1%
>2 V into 50
Ω
, 4V nominal into 10K
Ω
Level
Protection
Protected against temp
V dators
BIT,
LCOM
Position
Point 0 to n, Programm
Width Control
Programmable
4 to 100000 waveform p
Range
Resolution
Source
Channel
1
Specifications A-6
