LW120 User Manual
Figure 1-6c Segment 3 – Pulse Waveform
The following sequence was made of segment 2 repeated twice,
segment 1 repeated four times, and segment 3 repeated two times.
Figure 1- 6d. Sequenced Waveforms
Output State
The main outputs can be turned on or off. The internal circuit is
disconnected from the output connector by a mechanical switch
(relay). This feature is useful for connecting the main outputs to an
analog bus. For safety reasons, when power is first applied to the
chassis, the main output is always off.
Filters
Two filters for each channel are built into the LW120. These filters are
available for use in various applications such as the creation of high
frequency sine waves and removing the staircase effect from
waveforms that are generated with high frequency clock rates. The
filters are also used for reconstructing the standard sine waveform.
Getting Started 1-15
