LeCroy LW110 User Manual Download Page 164

Page: 164 / 210

User Manual LW120

the

offer and that is to make up one long waveform that contains many
sm

dow

the required segment sizes.

Want to use it? Here is how it is done.

Click with your mouse on the To Segment Table button. A dialog box

third etc. The second alternative is to use what ArbExplorer has

aller segments, download it to the instrument in one shot and the

nload a segment table that splits the entire waveform memory in

as shown in Figure 5-6 will pop up.

Figure 5-50. The Segment Table

which can have values only, from 1 to

4096. The

Length

is always associated with the segment number.

he segment list.

Use the

Insert

key to insert a segment at the cursor location. The

The

Clear All

key will remove all segments from the table and will let

The

Channel

field lets you select the active channel. If “1” is

displayed, then the table you’ll be constructing will affect channel 1.
Likewise, select “2” if you want to program the table for channel 2.

The two main fields in the segment table are Seg and Length. The

Seg

(segment) is an index field,

You can program any segment length from 16 to 4 Meg provided that
the sum of the length for all programmed segments does not exceed
your purchased waveform memory size.

Use the

Append

key to add a segment at the end of t

Delete

key is used for deleting a segment at the cursor position.

ArbExplorer 5-14

Summary of Contents for LW110



















































































































































































































Search results

Summary of Contents for LW110

Reviews:

Related manuals for LW110

Brands by name

Popular brands

LeCroy LW110, User Manual

Search results

Summary of Contents for LW110

Reviews:

Related manuals for LW110

Brands by name

Popular brands