- 30 -
CYCLE END PHASE
The system enters the cycle end phase:
-
the CYCLE END contact is closed;
-
only if
=
: consumption is stored;
-
From the beginning of the product extraction, if the
time is set and the product is not
extracted for at least 20 divisions within this interval of time, the
alarm is activated.
The instrument ends the batching, and opens the CYCLE END contact, only after verifying that:
-
the weight is lower than the minimum weight (
);
-
the safe emptying time has elapsed (
).
Only if
=
: the instrument waits for remote data reading, before being available for a new
batching. To confirm the reading, send command 250 to CMDR.
If several batching cycles have been set, the instrument starts a new cycle.
OPERATION SETTINGS
:
select the switch conditions from the SET opening to the CYCLE END closing.
-
(default:
): time set in constants (
);
-
(default:
): START input closure or command 209 sending to CMDR;
-
(default:
): stable weight.
(default:
)
:
select the operating mode of
SET and PRESET contacts.
-
=
: at the batching start, only the PRESET contact is closed; once reached the preset
set value, the related contact is opened and the SET contact is closed; reached the final
value of set, the related contact is opened;
-
=
: at the batching start, the SET and PRESET contacts are closed simultaneously;
once reached the preset value, the related contact is opened (beginning of the slow phase);
once reached the set value, also the related contact is opened. For single-speed batching,
program
=
and use only the SET contact;
-
=
: at the batching start, only the PRESET contact is closed; once reached the preset
value, also the SET contact is closed; once reached the final value of set, both are reopened.
(default:
): select the display type of net / gross weight during the CYCLE END phase
(unloading of the scale at the end of batching).
-
: during the cycle end, the net weight is displayed. After the CYCLE END opening, the
gross weight is displayed;
-
: during the cycle end, the gross weight is displayed.
