LAUMAS LCB, User Manual

Page: 33 / 80

- 28 -
BATCHING SEQUENCE PROGRAMMING
Select the desired formula and the number of cycles to run.
COMMUNICATION INTERFACE
WRITING READING

Write the number of cycles in W1.

Write the formula number in W2.

Send command 2031 to CMDR.

Send command 2030 to CMDR.

Read the number of cycles in R1.

Read the formula number in R2.
BATCHING START
Start the batching by closing the START external contact for at least 0.5 s or by sending command
201 to CMDR.
If at the end of the batching the START contact is closed, the same batching
sequence is repeated.
The instrument will ensure that:
-
the formula has been programmed, otherwise it will display the alarm  ;
-
the amount set in the formula does not exceed the set maximum weight (

), otherwise the
message  is displayed;
-
the gross weight is lower than the minimum weight (

), otherwise the alarm

is
displayed (however it is possible to force batching start by sending command 206 to CMDR);
-
only if

=

:
-
if the consumed amount exceeds 999000, the

message appears for a second;
-
if the consumed amount exceeds 999999, it is automatically set to zero.
Once these conditions have been verified, the instrument proceed to the batching execution phase.