manualshive.com logo in svg

Lauda MID 80, Operation Manual, Page: 9 / 40

Share
Download
Lauda MID 80 Operation Manual Download Page 9

1.9 

Structure of warnings

n

A warning of "dangerous" indicates an immediately dangerous situation.

n

If this warning is not observed, then death or severe, irreversible injury

could occur.

DANGER!

Type and source

Consequences of not following instructions

Measure 1

Measure...

n

A warning of "warning" indicates a possibly dangerous situation.

n

If this warning is not observed, then death or severe, irreversible injury

could occur.

WARNING!

Type and source

Consequences of not following instructions

Measure 1

Measure...

n

A warning of "caution" indicates a possibly dangerous situation.

n

If this warning is not observed, then minor, reversible injury could occur.

CAUTION!

Type and source

Consequences of not following instructions

Measure 1

Measure...

A "notice" warns that dangers to property or the environment may exist.

NOTICE!

Type and source

Consequences of not following instructions

Measure 1

Measure...

Dangerous

Warning

Caution

Notice

V2

Flow controller MID 80

9 / 38

Summary of Contents for MID 80









































Reviews:

No comments