9 Disposal
9.1
Disposing of packaging
The packaging normally consists of environmentally friendly materials that
can be easily recycled when properly disposed of.
n
Dispose of packaging materials in accordance with the applicable dis-
posal guidelines in your region.
n
Comply with the requirements of Directive 94/62/EC (packaging and
packaging waste) if disposing of the product in a member state of the
EU.
9.2 Disposing of heat transfer liquid
Different disposal guidelines may apply depending on the type of heat
transfer liquid.
n
Always read the safety data sheet of the heat transfer liquid before
handling it and note the information on work safety and environmental
protection in particular.
n
Only collect waste heat transfer liquid in approved and sealable con-
tainers.
n
Dispose of the heat transfer liquid without delay in accordance with the
applicable disposal guidelines in your region.
9.3 Disposing of an old device
The device must be properly decommissioned and disposed of at the end of
its life cycle.
n
Make sure that the device has been completely drained,
“Draining the device” on page 24.
n
Dispose of the device in accordance with the applicable disposal guide-
lines in your region.
n
Comply with Directive 2012/19/EU (WEEE Waste of Electrical and
Electronic Equipment) if disposing of the product takes place in a
member state of the EU.
V2
Flow controller MID 80
29 / 38