manualshive.com logo in svg

Lauda MID 80, Operation Manual, Page: 15 / 40

Share
Download
Lauda MID 80 Operation Manual Download Page 15

CAUTION!

Risk of external hydraulic circuit bursting due to overpressure

Scalding, cold burns

When laying the hoses, make sure they cannot kink.

CAUTION!

Bursting of the external application due to overpressure

Scalding, frostbite, impacts

For applications with a maximum permissible working pres-

sure that is less than the maximum pressure of the pump,

use a pressure relief device for protection. This pressure

relief device must be installed in the outflow to the applica-

tion.

Set the maximum pump pressure as per your application.

Mounting instructions for hoses and hose nozzles or ball bushes

Read and take note of the section "Mounting instructions for con-

necting an application" in the operating manual of the constant

temperature equipment.

Refer to the operating manual of the constant temperature equip-

ment for the permissible torque of the union nuts.

All hydraulic connections on the flow controller have an external thread

M38 x 1.5 mm.

V2

Flow controller MID 80

15 / 38

Summary of Contents for MID 80









































Reviews:

No comments