manualshive.com logo in svg

Lauda MID 80, Operation Manual, Page: 8 / 40

Share
Download
Lauda MID 80 Operation Manual Download Page 8

1.5 

Materials used

All parts in contact with the heat transfer liquid in the flow controller are

made of copper (piping), high-quality stainless steel (connections) and red

brass. The flow meter is covered with PTFE.

The device frame and the cover consist of painted sheet steel.

1.6 

Personnel qualification

Operating personnel

Operating personnel are personnel who have been instructed on how to use

the device as intended in line with the information in the operating manual.

Specialized personnel

Certain activities on the device must be performed by specialized personnel.

Specialized personnel are personnel whose education, knowledge, and expe-

rience qualify them to assess the function and risks associated with the

device and its use.

1.7 

Personal protective equipment

Protective gloves

Protective gloves must be worn for certain tasks. The protective gloves must

comply with the standard DIN EN 374. The protective gloves must be

chemically resistant.

Protective work clothing

Protective clothing must be worn for certain tasks. This protective clothing

must meet the legal requirements for personal protective equipment. The

protective clothing should be long-sleeved. Additionally safety shoes are

required.

Safety glasses

Safety glasses must be worn for certain tasks. The safety glasses must

comply with the standard DIN EN 166. The glasses must be tightly closed

and equipped with side plates.

1.8 

Prohibition of modifications to the device

Any technical modification of the device by the user is prohibited. Any

damage resulting from unauthorized modification is not covered by customer

service or the product warranty. Service work may only be performed by the

LAUDA Service department or a service partner authorized by LAUDA.

V2

Flow controller MID 80

8 / 38

Summary of Contents for MID 80









































Reviews:

No comments