The set consists of 2 EPDM hoses with a textile insert, hose nipples, screw
caps and cold insulation
n
Working pressure: maximum 10 bar
n
Temperature range: -40 – 100 °C
n
Application area: for the specified temperature range, for all LAUDA
heat transfer liquids
Designation
Length in cm
Catalog number
Clear width, Ø in mm x
wall thickness
Maximum
working pressure
in bar
Hose set M30x1.5 on both
ends
190
LSOZ0014
¾
",
Æ
25 x 4.5
10
Metal hose made from stainless steel with screw caps
n
Working pressure: maximum 10 bar
n
Temperature range: -100 – 350 °C
n
Application area: for heating and cooling applications with special insula-
tion, for all LAUDA heat transfer liquids
Hose type
Length in cm
Catalog number
Clear width in mm, connec-
tion thread
Maximum tightening
torque in Nm
M30X 100S
100
LZM 091
DN20, M30 x 1.5
70
M30X 200S
200
LZM 092
DN20, M30 x 1.5
70
M30X 300S
300
LZM 093
DN20, M30 x 1.5
70
Recommended hose set for Integral XT FC
Fig. 10: EPDM hose with cold insulation
Approved metal hoses for Integral XT FC
Fig. 11: Corrugated metal hose with cold
insulation
V4
Integral process thermostats with flow control unit
29 / 171
