Lauda IN 550 XT, Operation Manual

Page: 7 / 172

1 Safety
1.1 Safety notices
IMPORTANT
n
Before using the device, please read the operating manual carefully.
n
The information in this operating manual must be kept close at hand in
the immediate vicinity of the device.
n
Save the operating manual for later reference.
n
This operating manual is part of the device. If the device is passed on, the
operating manual must be kept with it.
n
The operating manual is available on our homepage (www.lauda.de).
An overview of authorized personnel and protective equipment
can be found in
Ä
Chapter 1.12 “Personnel qualification”
on page 13 and
Ä
Chapter 1.13 “Personal protective equip-
ment” on page 13 .
The "Safe State" of the constant temperature equipment in the event of
overtemperature, low level or failure is defined as:
n
Heating off.
n
The devices can only be operated as intended under the conditions
specified in this operating manual. Any other mode of operation is
considered to be unintended use and could compromise the protection
provided by the device.
n
You, the user, must check the functionality of the safety fittings of the
device. Observe the maintenance intervals.
n
Transport the device carefully. The device must never be tilted or turned
upside down.
n
The device and the inside of the device could be damaged:

due to fall,

due to shock.
n
The device may only be operated by trained personnel.
n
Never put the device into operation if:

it is damaged,

it is leaking (for example, heat transfer liquid is escaping),

the mains cable and/or other cables are damaged.
n
Do not install the device in areas with aggressive media.
n
The mounting surface must be tight, level, slip-resistant and non-com-
bustible.
n
Keep the specified distance from other devices, objects or walls.
n
Protect the device from dripping water or condensation.
n
Do not store any liquids or flammable objects above the device.
n
Do not handle flammable liquids in the immediate vicinity of the device.
n
Do not place heavy parts on the device.
n
The devices are intended for operation on grounded networks. Opera-
tion on IT networks, for example, is not permitted.
V4 Integral process thermostats with flow control unit 7 / 171