2
6
1
Intended use
The device is constructed in accordance with the latest engineering practice and
per the recognised safety regulations. Nevertheless, danger to the life and limb of
the user or third parties or damage to the device and other property may occur
when using it.
The device must be operated exclusively when in a technically faultless condition,
as intended, with an awareness of safety and potential hazards, and in accordance
with the operating manual.
The device is intended exclusively for laminating suitable materials. Any other use
or any use exceeding this is considered unintended use. The manufacturer shall
not be liable for any damage that results from misuse. The operator is solely
responsible for the resultant risk.
Safety instructions
The device is designed for an AC mains supply from 100 V to 240 V. It must be
connected exclusively to sockets with a grounded conductor contact.
The device must be operated exclusively in a dry environment and must not be
exposed to any moisture (spray, mist, etc.).
Do not operate the device in potentially explosive atmospheres.
Do not operate the device in close proximity to high voltage lines.
If the device is operated with an open cover then it is essential to ensure that
clothing, hair, jewellery and similar personal effects cannot come into contact
with the exposed, rotating parts.
The device or parts of it may become hot during lamination. Do not touch during
operation and allow to cool prior to changing the film if necessary.
Risk of crushing when locking the heated rollers or closing the cover.
Only execute the actions described in this user manual. Further work must be
carried out exclusively by trained personnel or service technicians.
Unprofessional intervention or modifications to the device may endanger
operational safety.
