Flow control: both sides lamination with flipper
Ribbon-Status:
<esc>RB<cr>
The following card is laminated in the laminator on both sides. The command
must be sent renewed for every card.
After the first lamination the card is turned in the flipper and is supplied to the
laminator once more. After the second lamination the card about the flipper is
ejected.
Foil category = “normal”:
It is laminated on both sides and, besides, synchronized always on the following
patch.
foil category = “alternative”:
It is laminated on both sides. Besides, the foil is synchronized first on the front-
sided and afterwards on the back-sided patch. Above the front-/ back-command
can be changed the start condition.
start lamination
Designating “both sides lamination”
Starting with “front-side”
Creating Command: RB
Retracting card to LXS
Waiting for LXS job done (BUSY = 0)
finish
front- and back-side
lamination
Designating front- or back-side
lamination
Creating Command: K02;3 or K02;4
optional
42
8
