32
6
Error messages
Error message
Cause
Remedy
#53 Tag invalid
Invalid tag information with
initial acquisition of the film.
Use permissible / approved film
material.
#54 RFID ERR=dd
Reader:Communication Error
dd=24 read err
dd=83 write err
Error message from tag reader.
Indicates signal between reader
and tag too weak. Visual
inspection!
#55 RFID CRC
Reader transfer error.
Contact problems between
board and tag reader
Check connection cable (service)
#56 RFID MSG
No response from tag
reader. Tag not seen or not
read.
Use permissible / approved film
material.
#61 card inside
Document located in the
transport tray after restart or
after and could not be
ejected
Remove document from the
transport tray manually.
CLEAR
#62 eject
Ejection of the document
failed.
Remove document from the
transport tray manually.
#63 transport
Transport of the document
failed.
Remove document from the
transport tray manually.
#64 retract
Intake of the document
failed.
Remove document from the
transport tray manually.
#65 ribbon end
Film end
Insert new film
#30 Standby
#31 Feeder empty
Feeder is empty
Insert cards to feeder and press
clear or send clear command.
Laminator is switched to the
energy saving mode.
Press Clear or send a Clear-
Command to end.
