33
6
#81 RFID no data
No response from tag reader.
Check tag reader.
Contact service!
#82 ADC problem
Impermissible ADU values
Check temperature sensor.
Contact service!
#83 ADC problem
No temperature increase to
record
Check temperature sensor.
Contact service
#84 heat roller
Heated roller not in limit
position
Contact service!
#85 heating
Circuit breaker for high
temperature has triggered.
Contact service!
#86 Sensor ???
Both sensors in transport tray
see document
Check transport tray, otherwise
Contact service!
#98 EEPROM/SETUP
No access to the EEPROM
Contact service!
#99 Call Service
Electronic type plate missing
Contact service!
Error message
Cause
Remedy
#87 Flipper
Flipper in wrong position
Check if card in flipper. If not,
contact service!
#66 ribbon synch
Synchronisation of the film
failed.
- Insert film with index marks
- Insert film correctly
- Configure correct film type
#67 ribbon trans
No film transport.
Check film
#71 Foil category
Foil category could not be
read
Press Clear or send a Clear-
Command to end. After this:
Category = normal