27
5
5
Control
Control commands
Reset
Command:
<ESC>!!<CR>
The laminator is reset. The process equates to a restart after a Power On.
Settings that are not saved in the macro are lost.
Function:
Clear Error
Startmenu:
Command:
<ESC>!c<CR>
Deletes error messages, refer also to the "trouble-shooting" chapter.
CLEAR
Function:
Both sides lamination
(only with optional flipper)
Command:
<ESC>RB<CR>
For both sides lamination, send this command for each card before input to the
laminator. This command is only executable if flipper is connected.
Function:
next patch
Command:
<ESC>RN<CR>
Foil-Transport to the next patch without reading ribbon status. Only for tests!
Function:
next patch synchronization
Command:
<ESC>RS<CR>
Foil-Transport to the next patch with reading and setting ribbon status. It can get
lost up to 2 patches. Only for tests!
Function:
Cleaning
Command:
<ESC>RC<CR>
Next card starts the cleaning procedure without foil and temperature.
