31
6
6
Troubleshooting
Types of errors and elimination
If an error occurs then this is signalled by the red ERROR LED whilst the error
message is shown on the display. Different error codes indicate the cause of the
problem. In a normal case it is possible to delete the error message after
eliminating the problem with after which the device is once again ready for
operation.
CLEAR
Status
LED
Display
Rectifiable errors
blinks
errorcode < #80
Non rectifiable errors
on
errorcode > #80
System errors
on
errorcode > #90
"Rectifiable errors" are usually film or transport errors, which are simple to
remedy.
"Non-rectifiable errors" are triggered by defective hardware. If a restart does not
solve the problem then service intervention is necessary.
In the event of a "system error" the device must be returned to the factory.
#61 card inside
As an alternative to the control panel it is also possible to query the error code via
the status message and delete this via the Clear command.
