The following commands are important for the handling with alternative foil:
Foil category - normal foil:
<esc>K80;0<cr>
Only makes sense if the definition of the foil category from should occur
externally. This is also the standard default, if none automatic recognition was
possible. Besides, is always synchronised on the following patch, even so if an
alternative foil is inserted. Front- and back-command have no influence.
Foil category - alternative foil:
<esc>K80;1<cr>
Only makes sense if the definition of the foil category from should occur
externally. Front- and back-command have influence on the foil synchronisation.
Synchronization:
<esc>K02;0<cr>
Regardless of the foil category it is always synchronised on the next patch. This
is also the standard default.
Synchronization:
<esc>K02;3<cr>
The next synchronisation starts from a front patch with followed change,
provided that an alternative patch foil is inserted. With the first synchronization
patches can be jumped over, if the ribbon status is still unknown.
Synchronisation:
<esc>K02;4<cr>
The next synchronisation starts from a back-patch with followed change,
provided that an alternative patch foil is inserted. With the first synchronisation
patches can be jumped over, if the ribbon status is still unknown.
40
8