36
7
After starting the Windows application
BootControl
it is possible to load new
firmware. Prior to this the interface agreements as well as the path for the access
to the application code (*.HEX) must be stipulated
The download process normally can be started as follows:
• Switch on laminator
• Press
„Starting firmware update
“
If anything goes wrong and the update-process cannot started, you need the
service-panel and started as follows:
• Switch on laminator and simultaneously hold the key down
• Press
„Starting firmware update
“
For service purposes the laminator is connected with the computer via the serial
interface. A standard cable RS-232 SERIAL SUB D9 connector jack is used.
Alternative, you also can use the LamiControl-Tool for downloading the newest
firmware and programming.
Windows-Application: BootControl
F1
