Usage of alternative foil
39
8
Attachment
8
With the usage of alternative foil a patch is in each case for card-front and
card-back in alternate order intended. For the Laminator it is important for the
synchronisation of the foil to know whether it concerns a normal or an alternative
foil (foil category). The real foil transport takes place always directly before the
lamination. At that time must be confessed by a suitable command in which
manner the positioning has to take place not to synchronise normally on the
following patch.
The category of the foil is read normally always after Power On about the RFID
information. Besides, a short foil transport can originate. If one wants to avoid
this or one works in general without RFID, one can suppress the automatic
capture in the menu (optional display or windows tool). Besides, the manually
definition of the category occurs again about the menu or also by command.
menu
PowerOn
Manual
registration
Automatic
registration
K80;0
Change
category
K80;1
command
Normal
Alternative
or
foil-category