Lantronix XPORT PROTM 900-560 User Manual Download Page 73

Page: 73 / 151

9: Service Settings

XPort Pro User Guide

HTTP Settings

Hypertext Transfer Protocol (HTTP) is the transport protocol for communicating hypertext

documents on the Internet. HTTP defines how messages are formatted and transmitted. It also

defines the actions web servers and browsers should take in response to different commands.

HTTP Authentication enables the requirement of usernames and passwords for access to the

XPort Pro device.
This page has three links at the top for viewing statistics and for viewing and changing

configuration and authentication settings.



HTTP Statistics

—Viewing statistics such as bytes received and transmitted, bad requests,

authorizations required, etc.



HTTP Configuration

—Configuring and viewing the current configuration.



HTTP Authentication

—Configuring and viewing the authentication.

HTTP Statistics

To view HTTP statistics:

This page shows various statistics about the HTTP server.
1. Click

HTTP

on the menu bar and then

Statistics

at the top of the page. The HTTP Statistics

page appears.

Figure 9-11 HTTP Statistics

Note:

The HTTP log is a scrolling log, with the last Max Log Entries cached and

viewable. You can change the maximum number of entries that can be viewed on the
HTTP Configuration Page.

Summary of Contents for XPORT PROTM 900-560
























































































































































Search results

Summary of Contents for XPORT PROTM 900-560

Reviews:

Related manuals for XPORT PROTM 900-560

Brands by name

Popular brands

Lantronix XPORT PROTM 900-560, User Manual

Search results

Summary of Contents for XPORT PROTM 900-560

Reviews:

Related manuals for XPORT PROTM 900-560

Brands by name

Popular brands