Lantronix XPORT PROTM 900-560 User Manual Download Page 138

Page: 138 / 151

14: VIP Settings

XPort Pro User Guide

138

Virtual IP (VIP) Counters

To view XPort Pro VIP settings:

1. Click

VIP > Counters

from the main menu. The VIP Counters page displays.

Figure 14-2 VIP Counters

Table 14-3

VIP Counters

Virtual IP (VIP) Configuration

To configure the XPort Pro VIP settings:

1. Click

VIP >Configuration

from the main menu. The VIP Configuration page displays.

Figure 14-4 VIP Configuration Page

2. Click

Enabled/Disabled

to use/turn off VIP addresses in Tunnel Accept Mode and Tunnel

Connect Mode. The default is disabled.

3. Click

Submit

save a changed state.

VIP Counters

Description

Data Bytes

Total bytes in the TCP packets (not the UDP packets)

UDP Packet Queue

The number of packets queued for transmission.

UDP Packets

The number of packets transmitted.

Note:

UDP counts are packet based, and do not record the

number of data bytes.

Summary of Contents for XPORT PROTM 900-560
























































































































































Search results

Summary of Contents for XPORT PROTM 900-560

Reviews:

Related manuals for XPORT PROTM 900-560

Brands by name

Popular brands

Lantronix XPORT PROTM 900-560, User Manual

Search results

Summary of Contents for XPORT PROTM 900-560

Reviews:

Related manuals for XPORT PROTM 900-560

Brands by name

Popular brands