XPort Pro User Guide
15
2:
Introduction
The
XPort Pro
embedded Ethernet Device Server is a complete network-enabling solution in a
13.50 (0.531) X 16.25 (0.640) X 33.90 (1.335) package. This miniature device server empowers
original equipment manufacturers (OEMs) to go to market quickly and easily with Ethernet
networking and web page serving capabilities built into their products. [DIMS = mm (in.)]
This chapter contains the following sections:
Key Features
Power Supply: Regulated 3.3V input required. There is a step-down converter to 1.5 volts for
the processor core. All voltages have LC filtering to minimize noises and emissions.
Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz internal bus and
83 MHz external bus.
Memory: 16 MB Flash and 8
/16
MB SDRAM. Please contact your sales representative if you
need larger memory sizes.
Ethernet: 10/100 Mbps Ethernet transceiver
Serial Ports: RS232-supporting high-speed serial port with all hardware handshaking signals.
Baud rate is software selectable (300 bps to 921600 bps).
Note:
The standard baud rate of 460800 bps is not supported for XPort Pro.
Configurable IO Pins (CPs): Up to three pins are configurable as general purpose I/Os if no
DTR or DCD is used on serial ports. Not 5V tolerant.
Interface Signals: 3.3V-level interface signals.
Temperature Range: Operates over an extended temperature range of -40°C to +85°C.
Applications
The XPort Pro device server connects serial devices such as those listed below to Ethernet
networks using the IP protocol family.
ATM machines
CNC controllers
Data collection devices
