8: Device Ports
SecureLinx SLC User Guide
70
The bottom part of the page displays the flow control lines and port statistics for the
device port. The system automatically updates these values. To reset them to zeros,
select the
Zero port counters
checkbox in the IP Settings section of the page.
Note:
Status and statistics shown on the web interface represent a snapshot in time. To
see the most recent data, you must reload the web page.
Device Port Commands
The following CLI commands correspond to the web page entries described above.
To configure a single port or a group of ports:
Example:
set deviceport port 2-5,6,12,15-16 baud 2400
set deviceport port <Device Port List or Name> <one or more device
port parameters>
Parameters:
auth <
pap
|chap>
banner <Banner Text>
baud <300-115200>
breakseq <1-10 Chars>
calleridcmd <Modem Command String>
calleridlogging <enable|
disable
>
chaphost <CHAP Host or User Name>
chapsecret <CHAP Secret or User Password>
The user defines the secret.
checkdsr <enable|
disable
>
closedsr <enable|
disable
>
databits <7|
8
>
device <
none
|slp8|slp16>
dialoutnumber <Phone Number>
dialoutlogin <User Login>
dialoutpassword <Password>
dialbacknumber <usernumber|Phone Number>
flowcontrol <
none
|xon/xoff|rts/cts>
idletimeout <disable|1-9999 seconds>
ipaddr <IP Address>
initscript <Initialization Script>
