6: Basic Parameters
SecureLinx SLC User Guide
51
Date and Time Commands
The following CLI commands correspond to the web page entries described above.
To set the local date, time, and local time zone (one parameter at a time):
set datetime <one date/time parameter>
Parameters:
date <MMDDYYhhmm[ss]>
timezone <Time Zone>
Note:
If you type an invalid time zone, the system guides you through the
process of selecting a time zone.
To view the local date, time, and time zone:
show datetime
To synchronize the SLC with a remote time server using NTP:
set ntp <one or more ntp parameters>
Parameters:
localserver1 <IP Address or Hostname>
localserver2 <IP Address or Hostname>
localserver3 <IP Address or Hostname>
poll <
local
|public>
publicserver <IP Address or Hostname>
state <
enable
|disable>
sync <
broadcast
|poll>
To view NTP settings:
show ntp
