11: PC Card
SecureLinx SLC User Guide
131
4. Enter the following settings for the selected PC Card:
Storage Settings
Mount
Select the checkbox to mount the first partition of the
Compact Flash on the SLC (if not currently mounted).
Once mounted, a Compact Flash is used for device port
logging and saving/restoring configurations.
Unmount
To eject the Compact Flash from the SLC,
first
unmount
the Compact Flash. Select the checkbox to unmount it.
Warning:
If you eject a Compact Flash from the SLC
without unmounting it, subsequent mounts of a PC
Card Compact Flash in either slot may fail, and you
will need to reboot the SLC to restore PC Card
functionality.
Format
Select to unmount the Compact Flash (if it is mounted),
remove all existing partitions, create one partition on the
Compact Flash, format it with the selected file system (ext2
or FAT), and mount it.
Filesystem
Select ext2 or
FAT
, the file systems the SLC supports.
5. Click
Apply
.
To enter modem settings for a PC Card:
1. Insert any of the supported modem or ISDN cards (see
www.lantronix.com/slc
) into
either of the PC Card bays on the front of the SLC. (You can do this before or after
powering up the SLC.)
2. From the main menu, select
PC Card
. The PC Card page displays.
3. Select the PC Card you want to configure from the PC Card Slots table and click
the
Configure
button. The PC Card – Modem/ISDN page displays.
