6: Basic Parameters
SecureLinx SLC User Guide
49
Equivalent Routing Commands
The following CLI commands correspond to the web page entries described above.
To configure static or dynamic routing:
set routing [parameters]
Parameters:
rip <enable|
disable
>
route <1-64> ipaddr <IP Address> mask <Netmask>
gateway <IP Address>
static <enable|
disable
>
version <1|
2
|both>
Note:
To delete a static route, set the IP address, mask, and gateway parameters to 0.0.0.0.
To set the routing table to display IP addresses (disable) or the corresponding host
names (enable):
show routing [resolveip <enable|
disable
>]
<Email Address>]
Note:
You can optionally email the displayed information.
Date and Time
You can specify the current date, time, and time zone at the SLC’s location (default), or
the SLC can use NTP to synchronize with other NTP devices on your network.
To set the local date, time, and time zone:
1. From the main menu, select
Date & Time
. The following page displays:
