10: User Authentication
SecureLinx SLC User Guide
120
Remote
Authentication
Right to assign a remote user to a user group and assign a
set of rights to the user.
SSH Keys
Right to set SSH keys for authenticating users.
User Menus
Right to create a custom user menu for the CLI for
users.
Device Ports
Right to enter device port settings.
PC Card
Right to enter modem settings for PC cards.
Reboot &
Shutdown
Right to use the CLI or shut down the SLC and then reboot it.
Firmware &
Configuration
Right to upgrade the firmware on the unit and save or restore
a configuration (all settings). Selecting this option
automatically selects
Reboot & Shutdown
.
Diagnostics &
Reports
Right to obtain diagnostic information and reports about the
unit.
SLC Network
Right to view and manage SLCs on the local subnet.
Web Access
Right to access Web-Manager.
5. Click
Apply
.
Note:
You must reboot the unit before your changes will take effect.
Commands
These commands for the command line interface correspond to the web page entries
described above:
To configure the SLC to use to authenticate users who log in via the
Web, SSH, Telnet, or the console port:
set tacacs <one or more parameters>
Parameters:
encrypt <
enable
|disable>
secret <TACACS Secret>
server <IP Address or Hostname>
state <enable|
disable
>
To set user group and permissions for users:
set tacacs group <default|power|admin>
