12: Maintenance and Operation
SecureLinx SLC User Guide
145
To restore the SLC to factory default settings:
admin config factorydefaults [savesshkeys <enable|
disable
>]
[preserveconfig <Config Params to Preserve>]
<Config Params to Preserve>
is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt –
Networking
lu -
Local Users
sv –
Services
dp -
Device Ports
dt -
Date/Time
pc -
PC Card
To restore a saved configuration to the SLC:
admin config restore <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <
upper
|lower>]
[keepconfig <Config Params to Keep>]
[preserveconfig <Config Params to Prserve>]
<Config Params to Preserve>
is a comma-separated list of current configuration
parameters to retain after the config restore or factorydefaults:
nt –
Networking
lu -
Local Users
sv –
Services
dp -
Device Ports
dt -
Date/Time
pc -
PC Card
To save the current SLC configuration to a selected location:
admin config save <Config Name> location
<default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS Mounted Dir>]
[pccardslot <
upper
|lower>]
To list the configurations saved to a location:
admin config show <default|ftp|sftp|nfs|cifs|pccard> [nfsdir <NFS
Mounted Dir>] [pccardslot <
upper
|lower>]
To run the quick setup script:
admin quicksetup
System Logs
The System Logs page allows you to
view
various system logs. (See
7: Services
for more
information about system logs.)
1. From the main menu, select
SLC Maintenance – System Logs
. The following
page displays:
