manualshive.com logo in svg

Lantronix SLC16, User Manual

The Lantronix SLC16 is an exceptional network device designed for seamless remote management of multiple consoles. Enhance productivity with this reliable console server that allows secure access and control. Complete with a comprehensive user manual available for free download, ensuring easy set-up and optimally utilizing this incredible device from manualshive.com.

Share
Download
background image

Appendix F: Protocol Glossary

SLC™ Console Manager User Guide

330

Dial-back

—The SLC console manager waits for a peer to call the SLC device, establishes a text 

(command line) or PPP connection, authenticates the user, and if the SLC console manager is 
able to determine a dial-back number to use, hangs up and calls the dial-back number to establish 
either a text or PPP connection.

For text connections, the user will be prompted for a login and password, and will be 
authenticated via the currently the currently enabled authentication methods (Local Users, 
NIS, LDAP, etc). Once authenticated, the SLC device will use the 

Dial-back Number

 

configured for the modem – either a fixed number assigned to the modem, or a number 
associated with the user that was authenticated (the user must have 

Allow Dial-back

 enabled 

and a 

Dial-back Number

 defined). If the SLC console manager can determine a dial-back 

number to use, it will hang up and wait 

Dial-back Delay

 seconds before initiating the dial-

back. The SLC device will dial, prompt the user again for a login and password, and a CLI 
session will be initiated. The user will remain connected to the SLC console manager until they 
either logout of the CLI session, or (if 

Timeout Logins

 is enabled) the CLI session is 

terminated if it has been idle.

For PPP connections, the user will be authenticated via PAP or CHAP (configured with the 

Authentication

 setting). For PAP, the Local User list will be used to authenticate the login and 

password sent by the PPP peer. For CHAP, the 

CHAP Handshake Host/User Name 

and 

Secret/User Password

 will be used to authenticate the login and password sent by the PPP 

peer. Once authenticated, the SLC device will use the 

Dial-back Number

 configured for the 

modem – either a fixed number assigned to the modem, or a number associated with the user 
that was authenticated (the user must have 

Allow Dial-back

 enabled and a 

Dial-back 

Number

 defined). If the SLC console manager can determine a dial-back number to use, it will 

hang up and wait 

Dial-back Delay

 seconds before initiating the dial-back. The SLC device will 

dial, and if the remote peer requests PAP or CHAP authentication, provide the 

Dial-out Login 

and 

Dial-out Password

 as authentication tokens. Once authenticated, a PPP session will be 

established using either negotiated IP addresses or specific IP addresses (determined by the 

Negotiate IP Address 

setting).

Dial-on-demand

—The SLC console manager automatically dial outs and establishes a PPP 

connection when IP traffic destined for the peer needs to be sent. It will remain connected until 
no data packets have been sent to the peer for a specified amount of time. The modem cannot 
be configured for 

Negotiate IP Address –

 it must be configured with a 

Local IP 

and a 

Remote IP 

as the PPP connection will be established when it sees IP traffic destined for the 

Remote IP

. When this occurs, the SLC device dials the 

Dial-out Number

, and if the remote 

peer requests PAP or CHAP authentication, provides the 

Dial-out Login 

and 

Dial-out 

Password

 as authentication tokens. Once authenticated, a PPP session will be established 

using the 

Local IP 

and the 

Remote IP

. The PPP connection will stay active until no IP traffic 

for the 

Remote IP 

is sent for 

Modem Timeout 

seconds. Once the timeout has expired, the 

PPP connection will be terminated and will not be reestablished for at least 

Restart Delay 

seconds.

Dial-in and Dial-on-demand

—A modem is configured to be in two modes: answering 

incoming calls to establish a PPP connection, and automatically dialing out to establish a PPP 
connection when IP traffic destined for the peer needs to be sent. When either event occurs 
(an incoming call or IP traffic destined for the peer), the other mode will be disabled. The 
modem cannot be configured for 

Negotiate IP Address –

 it must be configured with a 

Local 

IP 

and a 

Remote IP 

as the PPP connection will be established when it sees IP traffic destined 

for the 

Remote IP

.

For Dial-in, the user will be authenticated via PAP or CHAP (configured with the 

Authentication

 setting). For PAP, the Local User list will be used to authenticate the login and 

password sent by the PPP peer. For CHAP, the 

CHAP Handshake Host/User Name 

and 

Secret/User Password

 will be used to authenticate the login and password sent by the PPP 

Summary of Contents for SLC16
































































































































































































































































































































































Reviews:

No comments

Related manuals for SLC16

NEC Univerge SV8100 System Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 44
ABB i-bus KNX IPR/S 3.5.1 Product Manual preview
i-bus KNX IPR/S 3.5.1
Brand: ABB Pages: 44
Aaeon UP Squared 6000 Edge Computing Kit User Manual preview
UP Squared 6000 Edge Computing Kit
Brand: Aaeon Pages: 59
Sangoma A400 Installation Manual preview
A400
Brand: Sangoma Pages: 6
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie SATA II ExpressCard 34 Datasheet preview
SATA II ExpressCard 34
Brand: LaCie Pages: 2
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
Datasat AP25 Installation And Operating Manual preview
AP25
Brand: Datasat Pages: 170
Axis AXIS P1354 Installation Manual preview
AXIS P1354
Brand: Axis Pages: 104
Intel Itanium 9010 Manual preview
Itanium 9010
Brand: Intel Pages: 108
SMART MOD IIC Installation And Service Manual preview
MOD IIC
Brand: SMART Pages: 15
IBASE Technology FWA8207 Series User Manual preview
FWA8207 Series
Brand: IBASE Technology Pages: 39
ZALMAN CNPS11X Extreme User Manual preview
CNPS11X Extreme
Brand: ZALMAN Pages: 12
Rane HAL1x System Installation Manual preview
HAL1x
Brand: Rane Pages: 128
Acard AEC-6885 User Manual preview
AEC-6885
Brand: Acard Pages: 34
Shure DFR22 Software Manual preview
DFR22
Brand: Shure Pages: 113
MICROENER IM30-CV Operation Manual preview
IM30-CV
Brand: MICROENER Pages: 24

Brands by name

Popular brands

Load more brands