Lantronix SLC16 User Manual Download

Page: 242 / 351

13: Maintenance

SLC™ Console Manager User Guide

242

To configure the LCD:

The screens that are currently enabled are displayed in order in the left Enabled screens list.

Select a screen to be removed from the

Enabled Screens

and click the

button. The

screen moves to the

Disabled Screens

list to the right.

Select a screen to be added from the

Disabled Screens

list and click the

button. The

screen is added to the

Enabled Screens

to the left.

Select a screen in the

Enabled Screens

list and click the

button

to change the

order of the screens.

Note:

The User Strings screen displays the 2 lines defined by the User Strings - Line 1

and Line 2 fields. By default, these user strings are blank.

Click

Apply

to save.

To configure the Keypad:

Enter the following fields.

Click

Apply

to save.

LCD/Keypad Commands

The following CLI commands correspond to the

Maintenance > LCD/Keypad

page. For more

information, see

Chapter 15: Command Reference



admin keypad lock



admin keypad password



admin keypad show



admin lcd reset



admin lcd default



admin lcd screens



admin lcd line1



admin lcd scrolling



admin lcd show

Keypad Locked

Select this to lock out any input to the keypad. The default is for
the keypad to be unlocked.

Restore Factory Defaults Password /
Retype Password

Enter the 6 digit key sequence entered at the keypad to restore
the SLC unit to factory defaults. The default is

999999

Summary of Contents for SLC16
































































































































































































































































































































































Search results

Summary of Contents for SLC16

Reviews:

Related manuals for SLC16

Brands by name

Popular brands

Lantronix SLC16, User Manual

Search results

Summary of Contents for SLC16

Reviews:

Related manuals for SLC16

Brands by name

Popular brands