6: Basic Parameters
SLC™ Console Manager User Guide
62
Updating an IP Filter
To update an IP filter rule set:
1.
From the
page, the administrator selects the IP filter ruleset to be edited
and clicks the
Edit Ruleset
button to return to the
Network > IP Filter Ruleset (Adding/Editing
2.
Edit the information as desired and click the
Apply
button.
Deleting an IP Filter
To delete an IP filter rule set:
1.
page, the administrator selects the IP filter ruleset to be deleted and
clicks the
Delete Ruleset
button.
Mapping a Ruleset
The administrator can assign an IP Filter Ruleset to a network interface (Ethernet interface) a
modem connected to a Device Port.
To map a rule set to a network interface:
1.
On the
page, select the IP filter ruleset to be mapped.
2.
From the Interface drop-down list, select the interface and click the
Map Ruleset
button. The
Interface and rule set display in the IP Filter Mappings table.
To delete a mapping:
1) On the
page, select the mapping from the list and click the
Delete
Mapping
button. The mapping no longer displays.
2) Click the
Apply
button.
IP Filter Commands
The following CLI commands correspond to the web page entries described above.
To enable or disable IP filtering for incoming network traffic:
set ipfilter state
To set IP filter mapping:
set ipfilter mapping <parameters>
Parameters:
ethernet <1|2> state <disable>
ethernet <1|2> state <enable> ruleset <Ruleset Name>
deviceport <1..48> state <disable>
deviceport <1..48> state <enable> ruleset <Ruleset Name>
