6: Basic Parameters
SLC™ Console Manager User Guide
58
IP Filter
IP filters (also called a rule set) act as a firewall to allow or deny individual or a range of IP
addresses, ports, and protocols. When a network connection is configured to use an IP filter, all
network traffic through that connection is compared, in order, to the rules of that filter. Network
traffic may be allowed to pass, it may be dropped (without notice), or it may be rejected (sends
back an error packet) depending upon the rules of that filter rule set.
The administrator uses the
page to view, add, edit, delete, and map IP filters,
Warning:
IP filters configuration is a feature for advanced users. Adding and
enabling IP filter sets incorrectly can disable your SLC console
manager.
Viewing IP Filters
You can view a list of filters and a table showing how each filter is mapped to an interface.
To view a list of IP filters:
1.
Click the
Network
tab and select the
IP Filter
option. The following page displays:
Figure 6-2 Network > IP Filter
