4: Quick Setup
SLC™ Console Manager User Guide
42
After you complete the Quick Setup script, the changes take effect immediately.
Figure 4-7 Completed Quick Setup
Quick Setup will now step you through configuring a few basic settings.
The current settings are shown in brackets ('[]').
You can accept the current setting for each question by pressing
<return>.
____Ethernet Port and Default Gateway___________________________________
The SLC32 has two ethernet ports, Eth1 and Eth2.
By default, both ports are configured for DHCP.
Configure Eth1: (1) obtain IP Address from DHCP
(2) obtain IP Address from BOOTP
(3) static IP Address
Enter 1-3: [1]
The SLC32 can be configured to use a default gateway.
Enter gateway IP Address: [none]
____Hostname____________________________________________________________
The current hostname is 'slc', and the current domain is '<undefined>'.
The hostname will be shown in the CLI prompt.
Specify a hostname: [slc]
Specify a domain: [<undefined>]
____Time Zone___________________________________________________________
The current time zone is 'GMT'.
Enter time zone: [GMT]
____Date/Time___________________________________________________________
Hostname
The default host name is
slcXXXX
, where
XXXX
is the last 4 characters of the
hardware address of Ethernet Port 1. There is a 64-character limit (contiguous
characters, no spaces).
Note:
The host name becomes the prompt in the command line interface.
Domain
If desired, specify a domain name (for example, support.lantronix.com). The domain
name is used for host name resolution within the SLC unit. For example, if
abcd
is
specified for the SMTP server, and
mydomain.com
is specified for the domain, if
abcd
cannot be resolved, the SLC device attempts to resolve
abcd.mydomain.com
for the SMTP server.
Time Zone
If the time zone displayed is incorrect, enter the correct time zone and press
Enter
. If
the entry is not a valid time zone, the system guides you through selecting a time
zone. A list of valid regions and countries displays. At the prompts, enter the correct
region and country.
Date/Time
If the date and time displayed are correct, type
n
and continue. If the date and time
are incorrect, type
y
and enter the correct date and time in the formats shown at the
prompts.
Sysadmin
password
Enter a new sysadmin password.
CLI Quick Setup
Settings
Description
