manualshive.com logo in svg

Lantronix SLC16, User Manual

The Lantronix SLC16 is an exceptional network device designed for seamless remote management of multiple consoles. Enhance productivity with this reliable console server that allows secure access and control. Complete with a comprehensive user manual available for free download, ensuring easy set-up and optimally utilizing this incredible device from manualshive.com.

Share
Download
background image

8: Device Ports

SLC™ Console Manager User Guide

136

Modem Dialing States

This section describes how each modem state that supports sites operates when sites are 
enabled.

Dial In

The SLC console manager waits for a peer to call the SLC unit to establish a text (command line) 
or PPP connection.

For text connections, the user will be prompted for a login and password, and will be 
authenticated via the currently enabled authentication methods (Local Users, NIS, LDAP, etc). 
The site list will be searched for a site that (a) the 

Login/CHAP Host

 matches the name that 

was authenticated, (b) 

Authentication

 is set to PAP, and (c) the 

Port

 is set to 

None

 or 

matches the port the modem is on. 
If a matching site is found, the 

Timeout Logins

 parameter configured for the site will be used 

for the rest of the dial-in connection instead of the 

Timeout Logins

 parameter configured for 

the modem. Once authenticated, a CLI session will be initiated, and the user will remain 
connected to the SLC console manager until they either logout of the CLI session, or (if 

Timeout Logins

 is enabled) the CLI session is terminated if it has been idle. 

For PPP connections, the user will be authenticated via PAP or CHAP (determined by the 

Authentication

 setting for the modem). For PAP, the Local/Remote User list will be used to 

authenticate the login and password sent by the PPP peer, and the site list will be searched for 
a site that (a) the 

Login/CHAP Host

 matches the name that was authenticated, (b) 

Authentication

 is set to PAP, and (c) the 

Port

 is set to 

None

 or matches the port the modem 

is on. For CHAP, the site list will be searched for a site that (a) the 

Login/CHAP Host

 and 

CHAP Secret

 match the name and secret sent in the CHAP Challenge response by the PPP 

peer, (b) 

Authentication

 is set to CHAP, and (c) the 

Port

 is set to 

None

 or matches the port 

the modem is on. If the remote peer requests PAP or CHAP authentication from the SLC unit, 
the 

Remote/Dial-out Login

 and 

Remote/Dial-out Password

 configured for the modem (not 

the site) will be provided as authentication tokens. 
If a matching site is found, its 

Negotiate IP Address

, 

NAT

, and 

Modem Timeout

 parameters 

will be used for the rest of the dial-in connection instead of the parameters configured for the 
modem. Once authenticated, a PPP session will be established using either negotiated IP 
addresses or specific IP addresses (determined by the 

Negotiate IP Address

 setting). The 

PPP connection will stay active until no IP traffic is sent for 

Modem Timeout

 seconds. 

Dial-back

The SLC console manager waits for a peer to call the SLC device, establishes a text (command 
line) or PPP connection, authenticates the user, and if the SLC unit is able to determine a dial-
back number to use, hangs up and calls the dial-back number to establish either a text or PPP 
connection.

For text connections, the user will be prompted for a login and password, and will be 
authenticated via the currently enabled authentication methods (Local Users, NIS, LDAP, etc). 
The site list will be searched for a site that (a) the 

Login/CHAP Host

 matches the name that 

was authenticated, (b) 

Authentication

 is set to PAP, and (c) the 

Port

 is set to 

None

 or 

matches the port the modem is on. 
If a matching site is found, its 

Timeout Logins

, 

Dial-back Number

, 

Allow Dial-back

, and 

Dial-back Delay

 parameters will be used for the rest of the dial-back connection instead of the 

parameters configured for the modem. Once the remote server is authenticated, if 

Allow Dial-

back

 is enabled for the site and a 

Dial-back Number

 is defined, the SLC console manager 

will hang up and wait 

Dial-back Delay

 seconds before initiating the dial-back. The SLC unit 

will dial, prompt the user again for a login and password, and a CLI session will be initiated. 

Summary of Contents for SLC16
































































































































































































































































































































































Reviews:

No comments

Related manuals for SLC16

D-Link DSL-2740B Installation Manual preview
DSL-2740B
Brand: D-Link Pages: 10
CAME QBEMFSB2 User Manual preview
QBEMFSB2
Brand: CAME Pages: 19
Yamaha EMP100 Supplementary Manual preview
EMP100
Brand: Yamaha Pages: 4
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
Texas Instruments ThunderLAN TNETE100A Programmer'S Manual preview
ThunderLAN TNETE100A
Brand: Texas Instruments Pages: 179
Dentsply Sirona inLab Speedcure 9494800 Instruction Manual preview
inLab Speedcure 9494800
Brand: Dentsply Sirona Pages: 91
Barco ImagePRO-HD Installation Manual preview
ImagePRO-HD
Brand: Barco Pages: 121
IOtech ADAC/5500MF Installation Manual preview
ADAC/5500MF
Brand: IOtech Pages: 16
Abocom HomePlug AV Ethernet Bridge PLE0200 Quick Install preview
HomePlug AV Ethernet Bridge PLE0200
Brand: Abocom Pages: 2
Macsense MPC-200 User Manual preview
MPC-200
Brand: Macsense Pages: 13
Blackmagicdesign Teranex 2D Processor Installation And Operation Manual preview
Teranex 2D Processor
Brand: Blackmagicdesign Pages: 969
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Brand: Maipu Pages: 80
ZKTeco HVR0402 User Manual preview
HVR0402
Brand: ZKTeco Pages: 68
Renesas H8S/2437 Hardware Manual preview
H8S/2437
Brand: Renesas Pages: 746
Rolls HR11C - SCHEMA Wiring Diagram preview
HR11C - SCHEMA
Brand: Rolls Pages: 1
Olicom Ethernet MCA 10/100 Adapter Manual To Operations preview
Ethernet MCA 10/100 Adapter
Brand: Olicom Pages: 88
EZCast Pro Dongle II User Manual preview
Pro Dongle II
Brand: EZCast Pages: 24
Gundermann VIDEOWALL LEDWALL Optimizer HQ P2 Manual preview
LEDWALL Optimizer HQ P2
Brand: Gundermann VIDEOWALL Pages: 12

Brands by name

Popular brands

Load more brands